SI10T/K Rod End Bearing

SI10T/K Rod End Bearing is a spherical sliding bearing, the basic kind is composed of inner and outer rings with spherical sliding spherical contact surface. SI10T/K Rod End Bearing is especially composed of an internal ring with an outer spherical floor and an outer ring with an inner spherical surface, that may bear a big load. in line with its different types and systems, it is able to undergo radial load, axial load or blended load in both radial and axial directions. because the outer spherical floor of the inner ring is inlaid with composite materials, the bearing can produce self-lubrication during operation. it's far normally used for low-speed swinging movement, and also can be used for tilting movement inside a positive angle range. while the misalignment between the assisting shaft and the shaft housing hole is large, it can nevertheless paintings typically. self-lubricating joint bearings are utilized in water conservancy, professional machinery and different industries.

The spherical sliding contact area of SI10T/K rod end bearing is large and the inclination angle is large. At the same time, most of the joint bearings adopt special processing methods, such as surface phosphating, galvanizing, chrome plating or outer sliding surface lining, inserts, Spraying etc. Therefore, it has a large load capacity and impact resistance, and has the characteristics of corrosion resistance, wear resistance, self-aligning, good lubrication or self-lubrication without lubrication and dirt pollution, and can work normally even if the installation is misplaced. Therefore, SI10T/K rod end bearing is widely used in low speed swing motion, tilt motion and rotation motion.