linear guides and rails-manufacture,factory,supplier from China

一、 Composition structure1. Guide rail baseThe guide rail base is the foundation of the linear guide rail. It is usually made of iron, aluminum and other materials. It has mounting holes at the bottom for easy installation and fixation. In actual applications, the shape and size of the guide rail base are designed according to different use requirements and application locations.2. SliderThe slider is a moving part on the rail, usually made of metal or plastic. Sliders are mainly divided into: ball sliders, guide sliders, sliding sliders, etc.

The GSR15, GRS20, GSR25, GSR30, and GSR35 rails are designed to provide smooth linear motion without affecting the product's lifespan. Just tighten the installation bolts, and the top surface of the LM block can tilt, eliminating unnecessary gaps and allowing for the application of appropriate pre tightening force. Like the HRW series, the GSR model has a compact structure and a flat appearance, which can withstand loads in all directions. The LM guide rails and modules can be interchanged, making it convenient to store them separately.

Providing linear to curved HRW guides is an ideal choice for micro to large machine tools. This high-precision guide rail series includes: HRW14LR, HRW17, HRW21, HRW27, HRW50, HRW12LR. Due to its low center of gravity, wide guide rail, and low overall height, the model can be used in areas that require space savings. This product is also suitable for compact and heavy-duty applications, as it has high rigidity in all directions and does not require reinforced side support.

In this series, the ball row is placed at a 45 degree contact angle. The rated load is uniformly applied to the linear moving block in radial, reverse radial, and lateral directions. Due to this feature, the linear motion guide rail series can be implemented in all directions. As this is a global series, it offers a variety of sizes to accommodate a variety of applications from large to small. Our HSR series includes HSR8, HSR10, HSR12, HSR15, HSR20, HSR25, HSR30, HSR35, HSR45, and HSR55 rails, with block lengths ranging from 160 millimeters to 1600 millimeters.

Linear guideway；Linear bearing HGH25CADiameter of HGH..CA series:HG Series linear guideways are designed with load potential and stress greater than different comparable merchandise with circular-arc groove and shape optimization. It aspects 4-way equal load potential in the radial, reverse radial and lateral directions, and are self-aligning to soak up installation-error.

HG series is a four-row single-arc tooth contact linear guide, and integrates the optimized structure of the overweight load precision linear guide, compared with other linear guides to improve the load and rigidity; With four directions and other load features, and automatic aligning function, can absorb the mounting surface assembly error, get high precision demands.

This series is an ideal choice for horizontal orientation. The length range of the guide rails in this series ranges from 15mm in SR160 size to 55mm in SR2520 size. Blocks are also available in various sizes to choose from, and our SR series includes SR15, SR20, SR25, SR30, SR35, SR45, and SR55. The module is very suitable for installation in multiple different directions. Whether installed from below or suspended, the slim design of the SR series saves space and simplifies installation by pre tapping screw holes and bolts. Contact now to learn more about the SR series LM guide.

  Launch of the high-precision bearing LBB16UUOP, designed for users who demand first-class performance and quality. This product is ideal for applications requiring smooth and precise linear motion with excellent precision.    With its advanced technology, the LBB16UUOP possesses high precision, making it an excellent choice for a variety of industrial, commercial and scientific applications. It is manufactured with high-grade materials for excellent durability and abrasion resistance.

DescriptionThe precision linear shafts are widely used in automatic and rotating devices. Industrial automatic machines such as industrial robots, precision printers, automated transcription machines, automatic plastic wood machines, etc.Because the surface of the optical axis is processed by using distinct grinding and hard chrome plating technology, and then mirror polished. So, it has the advantages of resistance to friction and corrosion. Product DetailsThe material of our company's rail shaft is No.

DescriptionLinear Motion Shaft have high surface hardness, high-quality straightness and surface end which are the basic needs for Linear Ball Bushings. Above qualities of Shafts incredibly reduce friction and wear, enhancing Shaft and Machine Life. A wide variety of Custom Designed Shafts can be delivered, inclusive of Tapped Holes, Inch Sizes, Special Machining and key ways along the length or at the ends of the Shaft. Shafts are Hard Chrome Plated ensuring maximum protection in opposition to corrosion.The linear shaft adopts high carbon chromium steel as the raw material.

Product DetailsFeatures & Benefits：1. High Precision:Our Linear Shaft is designed to meet the highest levels of accuracy, with a tolerance of +/- 0.01mm. This feature ensures that the machine systems function efficiently, resulting in less downtime and increased productivity.2. Hardness:The shaft is made from high-quality carbon steel, which has a good level of hardness. This hardness level ensures long-term operation without any damage to the shaft. The carbon steel used also offers excellent resistance to corrosion, which makes it an best choice for use in harsh environments.3.

Ball bearing,Linear bearing,High precision bearing LM20UUThe linear bearing is composed of ball, cage, hardened shell and seals at both ends. Because the size of each part of the bearing has been standardized, it can be exchanged, and there is no need to worry about replacement after wearing out.The LM20UU is also highly versatile, as it is compatible with a wide range of machines and components.

AXK2035 Thrust Needle Roller BearingsChromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise. Needle Roller Thrust Bearings can accommodate axial loads in one direction only. Combined with 2 washers for applications where adjacent machine components cannot serve as raceways.Part NumberAXK2035The equivalents designations7316577013811Bearing TypeNeedle Roller Thrust BearingInner dia. (d)20 mmOuter dia.

DescriptionThe rest of the shaft is case-hardened, which will increase hardness and wear resistance on the surface of the shaft while allowing the center to remain soft for absorbing stresses caused by shifting loads. Use them with linear bearings to reduce friction in manual and automatic systems, such as those found in packing, machine tool, and material handling operations.Combine these general purpose shafts with a linear bearing and shaft support to create a primary linear motion system. Electroplated chrome rods are very suitable for wardrobes, towel racks and curtains.

Product DetailsLM shaft is manufactured by using the advanced process of fine cold drawing, fine grinding and high precision polishing, conforming to or above relevant national standards and specifications for more than a few technical indices.

Product DetailsRail shaft model of our company is from WC3 to WC150, from WCS3 to WCS150, Product quality is trustworthy, Hardening layer depth: 0.8-3mm, Chrome-rail shaft can be suitable for rust-prone surroundings or awful environment. This shaft is widely used in industrial robots and the moving parts of automatic sliding system devices. Product DescriptionThe rail shaft is widely used in many linear motion systems such as cylinder rods, automatic precision printers, automated reducing machines and industrial robots.

Cylindrical  Roller Bearing NJ2212M/C3.   It's brass cage type, C3 clearance. DIMENSION  SD    60mm     INNER RINGD     110mm    OUTER RINGB      28mm      WIDTHR      1.5mm     (MIN）R      11.5mm    (MIN)   The cylindrical roller and the raceway are linear contact bearings. Large load capacity, mainly bear radial load.

(1) Machine tool industry: Class II bearings are widely used in various precision machine tools, such as CNC machine tools, machining centers, etc. It can support the high-speed rotating spindle and has greater rigidity and stability, playing a key role in the precision machining process. (2) Shipping industry: Ships need to sail frequently on the sea, and the requirements for bearings are very strict.

bucket spindle/shaft KubotaThe bucket spindle for excavator is a top-of-the-line product that is designed to make excavating duties less difficult and extra efficient. With its greatest graph and exceptional construction, this product is certain to revolutionize the way that excavating is done.The bucket spindle is a indispensable issue of any excavator and is accountable for attaching the bucket to the machine.

The company and its products all adopt the international ISO quality management system and the latest national industry standards for production and processing. The company has strong technical strength, advanced technology, excellent equipment, complete testing methods, and has a bearing research and development institution. With the advantages of comprehensive research and integration, it has accelerated the development of new products and shortened the production cycle.Our superior geographical location and fast and convenient transportation have accelerated the development of our company.

6306; 6306-2RS; 6306ZZ, 2RS type is rubber seal, and ZZ type is steel seal. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.It is primarily used to undergo radial load and additionally can undergo axial load.

Bucket spindle, Excavator parts, Engineering parts                                bucket spindle specification120*750120*770120*780120*1000120*1090120*1120Customized manufacture. We can accept different diameters and request.

Rod end bearing POS10 PHS10Premium quality rod end bearings – a versatile and reliable solution for a wide range of applications. These bearings are designed to provide exceptional performance and durability, ensuring a longer service life and smoother operation.Constructed using high-grade materials, our rod end bearings are expertly crafted to ensure optimal strength and resistance to wear and tear.

Spherical Roller Bearings 22224E can accommodate heavy loads in both directions.  They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction and temperature.  The design includes characteristics to facilitate relubrication.