A Cylinder-manufacture,factory,supplier from China

Product DetailsRail shaft model of our company is from WC3 to WC150, from WCS3 to WCS150, Product quality is trustworthy, Hardening layer depth: 0.8-3mm, Chrome-rail shaft can be suitable for rust-prone surroundings or awful environment. This shaft is widely used in industrial robots and the moving parts of automatic sliding system devices. Product DescriptionThe rail shaft is widely used in many linear motion systems such as cylinder rods, automatic precision printers, automated reducing machines and industrial robots.

DescriptionThe precision linear shafts are widely used in automatic and rotating devices. Industrial automatic machines such as industrial robots, precision printers, automated transcription machines, automatic plastic wood machines, etc.Because the surface of the optical axis is processed by using distinct grinding and hard chrome plating technology, and then mirror polished. So, it has the advantages of resistance to friction and corrosion. Product DetailsThe material of our company's rail shaft is No.

DescriptionLinear Motion Shaft have high surface hardness, high-quality straightness and surface end which are the basic needs for Linear Ball Bushings. Above qualities of Shafts incredibly reduce friction and wear, enhancing Shaft and Machine Life. A wide variety of Custom Designed Shafts can be delivered, inclusive of Tapped Holes, Inch Sizes, Special Machining and key ways along the length or at the ends of the Shaft. Shafts are Hard Chrome Plated ensuring maximum protection in opposition to corrosion.The linear shaft adopts high carbon chromium steel as the raw material.

Plummer Block UCP207Pillow block bearing: Insert bearing with housing is a kind of bearing unit that combines rolling bearing with housing. Most of the outer spherical bearings are made of a spherical outer diameter, and are installed together with an imported bearing seat with a spherical inner hole. Parameter of Plummer Block UCP207Bore diameter (d) 35mmLength (L)166.5 mmHeight (H)47.6 mmBasic dynamic load rating Cr 25.5KNBasic static load rating Cor15.3KNWeight≈1.50KG

Pillow Block UCP210Pillow block bearing: Insert bearing with housing is a kind of bearing unit that combines rolling bearing with housing. Most of the outer spherical bearings are made of a spherical outer diameter, and are installed together with an imported bearing seat with a spherical inner hole. Picture of Pillow Block UCP210Parameter of Pillow Block UCP210Bore diameter (d) 50mmLength (L) 206.5mmHeight (H)57.2mmBasic dynamic load rating Cr35.1KNBasic static load rating Cor23.2KNWeight≈2.70KG

Pillow Block Housing UCP208Pillow block bearing: Insert bearing with housing is a kind of bearing unit that combines rolling bearing with housing. Most of the outer spherical bearings are made of a spherical outer diameter, and are installed together with an imported bearing seat with a spherical inner hole. Bore diameter (d) 40mmLength (L)184 mmHeight (H) 49.2mmBasic dynamic load rating Cr 32.5KNBasic static load rating Cor 20KNWeight≈2.00KG

bucket spindle/shaft KubotaThe bucket spindle for excavator is a top-of-the-line product that is designed to make excavating duties less difficult and extra efficient. With its greatest graph and exceptional construction, this product is certain to revolutionize the way that excavating is done.The bucket spindle is a indispensable issue of any excavator and is accountable for attaching the bucket to the machine.

Rod end bearing POS10 PHS10Premium quality rod end bearings – a versatile and reliable solution for a wide range of applications. These bearings are designed to provide exceptional performance and durability, ensuring a longer service life and smoother operation.Constructed using high-grade materials, our rod end bearings are expertly crafted to ensure optimal strength and resistance to wear and tear.

Pillow block bearing: Insert bearing with housing is a kind of bearing unit that combines rolling bearing with housing. Most of the outer spherical bearings are made of a spherical outer diameter, and are installed together with an imported bearing seat with a spherical inner hole. The structure is diverse, and the versatility and interchangeability are good.At the same time, this type of bearing also has a certain degree of alignment in design, is easy to install, and has a dual-structure sealing device that can work in harsh environments.The bearing seat is generally formed by casting.

A spherical roller bearing is a rolling-element bearing that allows rotation with low friction, and allows angular misalignment. Typically these bearings assist a rotating shaft in the bore of the internal ring that may additionally be misaligned in respect to the outer ring.

7207 angular contact bearing has a bore size of 35mm, an outer diameter of 72mm, and a width of 17mm. It is commonly made of chrome steel or stainless steel and is designed to withstand high-speed and high-load conditions.

Mounted Bearings UCP206Pillow block bearing: Insert bearing with housing is a kind of bearing unit that combines rolling bearing with housing. Most of the outer spherical bearings are made of a spherical outer diameter, and are installed together with an imported bearing seat with a spherical inner hole. Bore diameter (d)30mmLength (L)165mmHeight (H) 42.9mmBasic dynamic load rating Cr19.5KNBasic static load rating Cor11.4KNWeight≈1.20KG

 A thrust ball bearing is a type of ball bearing designed to carry axial loads. They consist of a housing, a shaft and a set of balls placed between them. When an axial load is applied to the bearing, the balls rotate in the raceways, causing the housing and shaft to move along the axis.  Our thrust ball bearings are manufactured to the highest industry standards and are available in a variety of sizes and designs to meet the needs of a variety of applications.

In this series, the ball row is placed at a 45 degree contact angle. The rated load is uniformly applied to the linear moving block in radial, reverse radial, and lateral directions. Due to this feature, the linear motion guide rail series can be implemented in all directions. As this is a global series, it offers a variety of sizes to accommodate a variety of applications from large to small. Our HSR series includes HSR8, HSR10, HSR12, HSR15, HSR20, HSR25, HSR30, HSR35, HSR45, and HSR55 rails, with block lengths ranging from 160 millimeters to 1600 millimeters.

needle bearing is a type of bearing with cylindrical roller. Relative to its diameter, the roller is thin and long, so it's called needle roller. Despite having a smaller cross-section, it still has a higher load bearing capacity.

BK SERIES needle roller bearing, no inner ring, one end closed type.   BK1212 needle roller bearing DIMENSION 12*18*12mm 1. What is a BK1212 needle roller bearing?A BK1212 needle roller bearing is a type of bearing that uses cylindrical rollers instead of balls to reduce friction between moving parts. BK1212 is a specific model of needle roller bearing that measures 12mm in diameter and has a width of 12mm. 2.

Introducing the NJ206E Single Row Cylindrical Roller Bearings, a revolutionary solution designed to enhance the efficiency and performance of your machinery.

(1) Machine tool industry: Class II bearings are widely used in various precision machine tools, such as CNC machine tools, machining centers, etc. It can support the high-speed rotating spindle and has greater rigidity and stability, playing a key role in the precision machining process. (2) Shipping industry: Ships need to sail frequently on the sea, and the requirements for bearings are very strict.

The deep groove ball bearing 6202 is a popular and widely used type of rolling-element bearing that has a single row of deep groove ball bearings that are capable of carrying axial and radial loads in both directions. It is commonly used in various applications, including electric motors, appliances, automotive components, and industrial machinery.The bearing has a bore size of 15mm and an outer diameter of 35mm with a width of 11mm. StructureInner ring, outer ring, balls and cage.

High precision 7215 Angular contact bearing7205AC is angular contact bearing with nylon cage. There are also steel and brass cage.The angular contact bearing 7215 has a bore size of 75mm, an outer diameter of 130mm, and a width of 25mm. It is commonly made of chrome steel or stainless steel and is designed to withstand high-speed and high-load conditions.

Product DetailsFeatures & Benefits：1. High Precision:Our Linear Shaft is designed to meet the highest levels of accuracy, with a tolerance of +/- 0.01mm. This feature ensures that the machine systems function efficiently, resulting in less downtime and increased productivity.2. Hardness:The shaft is made from high-quality carbon steel, which has a good level of hardness. This hardness level ensures long-term operation without any damage to the shaft. The carbon steel used also offers excellent resistance to corrosion, which makes it an best choice for use in harsh environments.3.

SCE108 Needle Roller Bearings SCE108 Needle roller bearings are normally utilized in programs in which the housing bore cannot be used as a raceway for a needle curler and cage meeting, however wherein a totally compact and economical bearing association is needed.Good heat tolerance, high load-carrying capacity, and stiffnessLow cross section, enables downsizing and suit for use in restricted mounting spaces Pre-Lubricated. Good running properties Designations:SCE108Main dimensions15.875×20.638×12.7Bore Dia15.875Outside Dia20.638Width Dia12.7C8.559 

NKI SERIES needle roller bearing, WITH inner ring.   NK and NKI BEARING:The NKI series is with an inner ring.NK series is without an inner ring. Solid ring needle roller bearings have a compact structure, small radial size and large load capacity. They are suitable for parts with limited radial profile size. They can also be widely used when the shaft or shell has a swinging motion.

6142935YSX is gear reducer bearing, eccentric Bearing. DIMENSIONS: Inner ring: 25mmOuter ring:68mmThickness:42mmApplication: Reducer/reduction gears   An eccentric rolling drive is a transmission with parallel but non-overlapping shafts, consisting of an eccentric rolling unit fitted with a CAM. The eccentric rolling drive consists of an input shaft 1 on which an eccentric rolling unit 2 is mounted, which in turn consists of an eccentric bushing and a ball bearing (Figure 1).