6306rs Bearing-manufacture,factory,supplier from China

SI10T/K Rod End Bearing is a spherical sliding bearing, the basic kind is composed of inner and outer rings with spherical sliding spherical contact surface. SI10T/K Rod End Bearing is especially composed of an internal ring with an outer spherical floor and an outer ring with an inner spherical surface, that may bear a big load. in line with its different types and systems, it is able to undergo radial load, axial load or blended load in both radial and axial directions.

Applications of outer spherical bearings1. Applicable to most bearing parts. The outer spherical bearing plane can be directly installed with most bearing parts and has a wide range of applications.2. Widely used in agricultural machinery and construction machinery. Due to their large load-bearing capacity, outer spherical bearings are suitable for large heavy-duty equipment and are therefore widely used in agricultural machinery and construction machinery.Insert spherical ball bearings can be divided into three categories according to the way they cooperate with the shaft:1.

Rod end bearing is spherical plain bearing with a rod end or mounted on the rod end. Its consist mostly of an inner ring with external sphere and an outer ring with internal sphere. Joint bearing is generally used in low speed swinging motion (namely, the angular motion.

This bearing is double row cylindrical  Roller Bearing.  It has two structures: cylindrical inner hole and tapered inner hole (K type). NN type bearing has no guard on the outer ring, the inner ring has a guard on both sides and a middle guard.

Universal joint bearing GUMZ3Cross cardan shaft, also called cross cardan joint, is one of the very important transmission devices in the vehicle or other mechanical equipment, mainly used to connect the power transmitted by the vehicle engine and the wheel or other working mechanism of the power, so that it can rotate in different angles and directions. In modern vehicles and mechanical equipment, the cross cardan shaft plays a vital role, which can greatly improve the efficiency and safety of mechanical transmission.

POS16 is a type of rod end bearing. Rod end bearings belong to radial spherical plain bearing. It can withstand large loads. According to its different types and structures, it can withstand radial load, axial load or radial and axial combined load. Since the outer sphere of the inner ring is inlaid with composite material, the bearing can be self-lubricating in operation.

Rod end bearing POS10 PHS10Premium quality rod end bearings – a versatile and reliable solution for a wide range of applications. These bearings are designed to provide exceptional performance and durability, ensuring a longer service life and smoother operation.Constructed using high-grade materials, our rod end bearings are expertly crafted to ensure optimal strength and resistance to wear and tear.

When it comes to ensuring smooth and precise rotational motion, having the right bearings is crucial. We are proud to introduce our latest innovation in bearing technology - the 30303 single row tapered roller bearing. Engineered for precision and performance, these bearings will revolutionize the way you handle rotating applications. Product DescriptionTapered roller bearing 30303 tapered bearing size: 17*47*15.25             

Introducing the HK 3030 High Precision Bearing 30x37 x 30mm Needle Roller Bearing HK3030 – a product that offers unparalleled quality and performance. Combining superior functionality with a commitment to customer satisfaction, this bearing is set to revolutionize the industry.Products DescriptionAt the forefront of innovation, our manufacturing processes ensure that every HK 3030 high-precision bearing meets the highest quality standards. We understand the importance of bearing precision and durability, so we invest in state-of-the-art technology and equipment.

Pillow block bearing UCF215Pillow block bearing: Insert bearing with housing is a kind of bearing unit that combines rolling bearing with housing. Most of the outer spherical bearings are made of a spherical outer diameter, and are installed together with an imported bearing seat with a spherical inner hole. Bore diameter (d)75mmLength (L)200mmHeight (T)78.3mmBasic dynamic load rating Cr66.3KNBasic static load rating Cor49KNWeight≈6.20KG

NK1616 Needle Roller Bearing - the perfect solution for your industrial needs. This high-quality bearing is perfect for use in a range of applications, from machinery and equipment to automotive and aerospace industries. Made from premium materials and manufactured to exacting standards, the NK1616 Needle Roller Bearing boasts a range of impressive features that ensure superior performance and durability.

Pillow block bearing UCF212Pillow block bearing: Insert bearing with housing is a kind of bearing unit that combines rolling bearing with housing. Most of the outer spherical bearings are made of a spherical outer diameter, and are installed together with an imported bearing seat with a spherical inner hole. Parameter of Pillow block bearing UCF212Bore diameter (d)60mmLength (L)175mmHeight (T)68.5mmBasic dynamic load rating Cr52.7KNBasic static load rating Cor36KNWeight≈4.15KG

Pillow block bearing UCF216Pillow block bearing: Insert bearing with housing is a kind of bearing unit that combines rolling bearing with housing. Most of the outer spherical bearings are made of a spherical outer diameter, and are installed together with an imported bearing seat with a spherical inner hole. Parameter of Pillow block bearing UCF216Bore diameter (d)80mmLength (L)208mmHeight (T)83.3mmBasic dynamic load rating Cr71.5KNBasic static load rating Cor54KNWeight≈7.35KG

Pillow Block Ball Bearing Units UCP204Pillow block bearing: Insert bearing with housing is a kind of bearing unit that combines rolling bearing with housing. Most of the outer spherical bearings are made of a spherical outer diameter, and are installed together with an imported bearing seat with a spherical inner hole. Parameter of Pillow Block Ball Bearing Units UCP204Bore diameter (d) 20 mmLength (L) 127mmHeight (H) 33.3mmBasic dynamic load rating Cr12.70 KNBasic static load rating Cor6.70KNWeight≈0.60KG

6142935YSX is gear reducer bearing, eccentric Bearing. DIMENSIONS: Inner ring: 25mmOuter ring:68mmThickness:42mmApplication: Reducer/reduction gears   An eccentric rolling drive is a transmission with parallel but non-overlapping shafts, consisting of an eccentric rolling unit fitted with a CAM. The eccentric rolling drive consists of an input shaft 1 on which an eccentric rolling unit 2 is mounted, which in turn consists of an eccentric bushing and a ball bearing (Figure 1).

Deep groove ball bearing 6001-2RSAlso have ZZ type, open type in stock. This high-quality bearing is designed to deliver unparalleled precision and smooth operation, making it ideal for use in a wide range of industrial and automotive applications.At the core of the 6001-2RS ball bearing is a deep groove construction, which facilitates the distribution of radial and axial loads evenly across the bearing's surface.

Stamping outer ring needle roller bearing outer ring is with thin steel plate precision stamping molding, and keep frame and the whole group of needle roller composition, stamping outer ring needle roller bearing radial cross-section thickness is very small, and has a large load capacity, especially suitable for the requirements of economy of the large quantity products. 　　The outer ring of this type of needle roller bearing and the bearing box adopts the interference fit, does not need the axial fixing device. This ensures effective performance even at high speeds and high loads.

Introducing Axial Tapered Roller Bearing - T126, a high-quality, efficient bearing explicitly designed to meet your industrial needs. Designed for applications requiring high axial loads and limited radial space, these bearings offer exceptional performance and durability. In summary, Thrust Tapered Roller Bearing - T126 is a reliable and efficient bearing designed to meet your industrial needs. The bearing's ability to handle high axial loads, compact design and durability make it an excellent choice for demanding applications.

Pillow Block Bearing UCP205-16Pillow block bearing: Insert bearing with housing is a kind of bearing unit that combines rolling bearing with housing. Most of the outer spherical bearings are made of a spherical outer diameter, and are installed together with an imported bearing seat with a spherical inner hole. Parameter of Pillow Block Bearing UCP205-16Bore diameter (d)25.40 mmLength (L)139.50mmHeight (H)36.50mmBasic dynamic load rating Cr14KNBasic static load rating Cor 7.8KNWeight≈0.75KG

Pillow Block Bearing UCP205Pillow block bearing: Insert bearing with housing is a kind of bearing unit that combines rolling bearing with housing. Most of the outer spherical bearings are made of a spherical outer diameter, and are installed together with an imported bearing seat with a spherical inner hole. Bore diameter (d) mmLength (L) mmHeight (H) mmBasic dynamic load rating Cr KNBasic static load rating Cor KNWeight≈KG

Spherical roller bearing 23022CA  Details of Spherical Roller Bearing 23022CA       d：   110mmD：   240mmB：   80mmLimit speed：1600 r/minCr：740000 NCor：980000 N 

6205-2RSNR Deep groove ball bearing This is a kind of bearing with snap ring (circlip) on outer ring. Bearing with circlip refers to a bearing structure which is equipped with circlip on the bearing fixed structure to prevent the bearing from falling off during use.

Plummer Block UCP207Pillow block bearing: Insert bearing with housing is a kind of bearing unit that combines rolling bearing with housing. Most of the outer spherical bearings are made of a spherical outer diameter, and are installed together with an imported bearing seat with a spherical inner hole. Parameter of Plummer Block UCP207Bore diameter (d) 35mmLength (L)166.5 mmHeight (H)47.6 mmBasic dynamic load rating Cr 25.5KNBasic static load rating Cor15.3KNWeight≈1.50KG

CS10 Rod end bearingWidely used in machinery, power tools, automation equipment, precision instruments, etc.(such as lawnmowers, tractors, shopping carts, etc.)It has characteristics of impact resistance, anti-corrosion, high-temperature resistance, low noise, and durability.CS10 rod end bearing is a small self-aligning ball bushing that can convey massive radial hundreds and bidirectional axial masses at the identical time.